trotec

Overview

Machine tool that, using 2D data, carves or cuts think wood materials or acryl sheets with a laser. Can process acryl (up to 5mm), wooden materials (up to 5mm), paper, felt (synthetic fibers), rubber made for laser processing, leather, etc. Not to be used on food.

Specs

  • Official name: trotec Speedy300
  • Largest processing size: W727*H432mm
  • Output: 30W

Creating data

  • Set color mode to “RGB Mode”
  • Set document size to “Material size” or “Approx. data size”
  • Create 1 art board
  • It is possible to split data into layers
  • Marking → Black (R:0, G:0, B:0) fill in, no lines
  • Cutting … Red (R:255, G:0, B:0) Line width 0.001mm, no fill in
  • Engraving … Blue (R:0, G:0, B:255) Line width 0.001mm, no fill in
  • Item you want to cut last … Green (R:0, G:255, B:0) Line width 0.001mm, no fill in
  • Save version for illustrator goes up to CS6

データの作成方法(trotec用)

データのカラーモード修正方法(trotec用)

Operating instructions for trotec

Operating instructions for trotec

加工データの読み込み?基本操作(trotec用)

Maintenance

  • Confirm position of table before machining
  • When the dust collector exceeds 60%, temporarily stop machine and exchange tissue
  • Check mirror and lens
  • Remove any garbage underneath the honeycomb table after machining
  • Whenever there is anything burned or stuck underneath the table, use the Magiclean, then wipe with a damp cloth, and wipe with a dry cloth

ミラー?レンズの確認?清掃方法

集塵機について

Inside of the dust collector

スクリーンショット 2016-07-14 13.23.36

集塵機の確認方法

Other

加工したことがない素材のとき※準備中